Microphone Has No Sound in a Browser: Check the Input Path
Check device selection, mute and both browser and operating system permission before blaming the microphone.
Confirm the selected device
An operating system can expose a laptop microphone, a headset and a webcam microphone at the same time. Select the intended input in the system and in the test where a selector is available. Check a physical mute switch and any headset control. Speak normally near the selected microphone rather than assuming the default device is correct.

Check both permission layers
A website needs permission from the browser, and the browser needs access from the operating system. Review the site permission for this domain and the system microphone privacy setting. Refresh the test after a deliberate change. A managed work device may have restrictions that you cannot change; use its support process rather than bypassing them.
Record and play back
Start a short recording only when ready, say a non private test sentence and stop. Listen to the result using a known working output. If the meter moves but playback is silent, verify the playback device and volume. That is a different branch from receiving no input signal at all.
Compare another application
Use a trusted application with the same selected microphone. If it works there but not in one browser, focus on that browser's permission and device selection. If it fails everywhere, check connection and manufacturer guidance. A browser test cannot identify an internal hardware failure from silence alone.