All tools
EN
EnglishDeutschFrançaisEspañolPortuguês (Brasil)ItalianoPolski日本語한국어繁體中文NederlandsSvenskaČeštinaTürkçeBahasa IndonesiaTiếng ViệtไทยУкраїнськаРусскийRomână

Microphone Level Meter: Monitor Relative Input Levels

Enable microphone → Allow access only when you want to run the test. Stop the test to release the device.

Test area

Results

—

What the level meter reads

The meter starts only after you enable the microphone and allow access. It shows RMS, dBFS, and peak for the signal the browser is receiving, and you can reset the view.

dBFS is a digital level, not decibels of sound pressure in the room. Automatic gain, the chosen mic, and the browser can all move the trace. Stop the test to release the device, and the reading does not certify the microphone.

Common questions

Why does the number jump in a steady room?

The browser or the microphone may apply automatic gain. The meter follows the digital signal, so the trace can move when the room does not.

Is this a sound-level meter for the room?

No. dBFS comes from the sample values. It is not dB SPL, and the page does not convert it into environmental decibels.

When does the microphone turn on?

Only after you enable it and grant access. Stop releases the device.

How to use this tool

Enable microphone → Allow access only when you want to run the test. Stop the test to release the device.

ResultsMethod and units
RMS√(Σ sample² / N)
dBFS20 × log₁₀(RMS)
Peak20 × log₁₀(max |sample|)

Example

RMS: 0.1 · dBFS: −20 · Peak: −10 dBFS

What this test can and cannot tell you

Results reflect events and signals available to your browser. Settings, permissions and device support can affect them; they do not certify that hardware is healthy or faulty.

Microphone dBFS is a digital signal level, not room dB SPL

Allow access only when you want to run the test. Stop the test to release the device.

Related guides

All guides

Related tools