All tools
EN
EnglishDeutschFrançaisEspañolPortuguês (Brasil)ItalianoPolski日本語한국어繁體中文NederlandsSvenskaČeštinaTürkçeBahasa IndonesiaTiếng ViệtไทยУкраїнськаРусскийRomână

Stereo Speaker Test: Check Left and Right Channels

Play sound → Lower your device volume first. Choose frequency, output level and channel where available, then start. Playback stops after 10 seconds. Stop immediately if uncomfortable.

Test area

Results

—

What the left and right channel check plays

Lower the volume first, then choose a frequency, a level, and a channel where those controls are available. The worked example is 440 Hz at 5 percent. Playback stops after 10 seconds.

Frequency can run from 20 to 20000 Hz, and the level stays within 0 to 25 percent. Mono downmix and system effects can change what you hear, so stop immediately if it is uncomfortable. The test does not certify the speakers.

Common questions

Why might left and right sound the same?

The system may be mixing both channels to mono, or an effect may be combining them. The page sends the channel you chose. It cannot see the wiring.

How loud is the starting point?

The example level is 5 percent, inside a 0 to 25 percent control. Playback lasts at most 10 seconds. Start lower if you are unsure.

Which frequency is the example?

440 Hz. Where the control is available you can choose from 20 to 20000 Hz.

How to use this tool

Play sound → Lower your device volume first. Choose frequency, output level and channel where available, then start. Playback stops after 10 seconds. Stop immediately if uncomfortable.

ResultsMethod and units
ChannelL / R / L+R
Frequency440 Hz (20–20,000)
Volume5% (0–25%)
Seconds≤ 10

Example

Channel: L · Frequency: 440 Hz · Volume: 5%

What this test can and cannot tell you

Results reflect events and signals available to your browser. Settings, permissions and device support can affect them; they do not certify that hardware is healthy or faulty.

Related tools