All tools
EN
EnglishDeutschFrançaisEspañolPortuguês (Brasil)ItalianoPolski日本語한국어繁體中文NederlandsSvenskaČeštinaTürkçeBahasa IndonesiaTiếng ViệtไทยУкраїнськаРусскийRomână

Controller Stick Drift Test

Connect your controller and press a button to see live input.

Test area

Results

—

What resting stick values show

Connect the controller, press a button, then let the sticks sit. The page shows X and Y, each from -1 to +1, and the maximum radius, the square root of X squared plus Y squared.

A small resting value can be noise, filtering, or drift. There is no cutoff on this page that declares the stick defective, and browser readings can already include calibration. The trace is not a certified hardware specification.

Common questions

How should I hold the controller?

Leave the sticks untouched while you read them. A worked example on the page only illustrates the radius math. It is not a pass mark.

What radius means the stick has failed?

This test does not define one. It shows the axes and the maximum radius so you can compare a repeat sample.

Can the browser hide drift?

Filtering and calibration may already be applied to the axes you see, so the trace can look smaller than the raw mechanism.

How to use this tool

Connect your controller and press a button to see live input.

ResultsMethod and units
AxesX, Y: −1…+1
Maximummax √(X² + Y²)

Example

Axes: X=0.02, Y=−0.01 · Maximum: R≈0.0224

What this test can and cannot tell you

Results reflect events and signals available to your browser. Settings, permissions and device support can affect them; they do not certify that hardware is healthy or faulty.

Stick radius and held-key counts describe browser data, not certified hardware specifications

Related guides

All guides

Related tools